Casablanca MIDDLEBURY Owner's Manual download pdf (Page 11)

IDDLEIDDLE

IDDLE

URUR

™™

™

Send Signal

LED

Fan Control

To start the fan. Press the selected speed button to run the fan at the desired speed.

LOW=Low speed MED=Medium speed HIGH=High speed

To turn off the fan, press the FAN OFF button.

Airflow Direction

To reverse the airflow, press the REVERSE button. REVERSE operates at any speed

whether the fan is on or off. The fan returns to its set speed after reversing.

Light Control

Turn the light on or off independently from the fan by pressing the LIGHT rocker

switch. (Press the left side for the uplight, right side for the downlight, and the middle for

both.) If you press the button for more than 0.7 seconds, it becomes a dimmer. The light

varies from “bright" to “dim” over approximately 8 seconds. If you continue to hold the

LIGHT button, this sequence will reverse when the light reaches its brightest or dimmest

level. Release the button when the desired level is reached.

Auto Resume

Quick (pressing less than 0.7 seconds) on/off operation of the LIGHT button maintains

the desired brightness level set previously.

If the fan is not functioning after installation:

Step 1. Check to make sure the batteries are installed correctly in

the control.

Step 2. Turn the power off to the fan (from the circuit breaker)

for at least 5 seconds.

Step 3. Turn the power back on (at the circuit breaker) and push

the HIGH, MED, and LOW buttons–in that order–within 20

seconds. The fan should now function properly.

CHANGING TRANSMITTER FREQUENCY SETTING

You will only have to change the dip switch settings in the remote

if you are using more than one fan in the same area and want to

control them separately.

Step 1. At the circuit breaker or fuse box, turn the power off for

the fan you want to change.

Step 2. Open the battery door of the Versa•Touch control and

remove the batteries.

Step 3. Change the dip switch settings, assuring that they are

different from the previously installed Versa•Touch fan.

Step 4. Reinstall the batteries and the battery door on the control.

Step 5. At the circuit breaker or fuse box, turn the power back on

for the fan whose frequency you are changing.

Step 6. Within 20 seconds of restoring power, push the HIGH,

MED, and LOW buttons (in that order).

Circuit Breaker

or Fuse Box

Press in this order to set new

frequency:

1. HIGH 2. MED 3. LOW

Dip Switch

set to “01001”

Dip Switch

set to “10000”

Versa•Touch 2

Control

(back)

LOW

MED

HIGH

DOWNLIGHT

FAN

OFF

REVERSE

Note: You may want to label your controls to assure you do not

mix them up.

REMOTE OPERATION

WARNING!

Do not turn the power off at the circuit breaker,

then back on, for the previously installed

Versa•Touch2 fan(s), as you may inadvertently

change the frequency settings for it as well.

Note: All fans leave the factory set to “00000.”

UPLIGHT

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Casablanca MIDDLEBURY Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Household fans Casablanca MIDDLEBURY