Casablanca Panama Halo Owner's Manual download pdf (Page 4)

crossbar mounting bracket installation

JOIST

CEILING

WIRING

CROSSBAR

MOUNTING

BRACKET

FLAT

WASHER

GREEN GROUND

WIRE

CEILING FAN

APPROVED

WIRING BOX

RIDGE SIDE

DOWN

APPROVED OUTLET

BOX HARDWARE

Note: After removing the old xture, check the outlet

box to insure that it is supported by a joist or beam

across its upper surface. If not, a 2” x 4” stud must

be installed.

 Remove the knockout plug in the center of the

outlet box or drill a

/2” holeforthe lag screw to pass

through. Then drill a

/4”guideholeintothejoistorbeam

toadepthof3”.

 Route the outlet box wires through the keyhole

slot of the crossbar mounting bracket as shown. Attach the

crossbar mounting bracket to outlet box with screws pro-

vided, assuring that the outlet box wires are not pinched

by the washer.

CAUTION: To reduce the risk of personal

injury, use only the mounting hardware pro-

vided with the approved outlet box to install

the crossbar mounting bracket.

WARNING!

SUPPORT DIRECTLY TO

BUILDING STRUCTURE ONLY.

 With the large washer attached, pass the lag

screw through the center hole of the crosbar mounting

bracket and screw into guide hole. Tighten until outlet

boxisrmlymountedtobeam.Thisboxmustbermly

secured to the ceiling. We recommend that the ceiling

xtureoutletboxbeofsufcientcapacityenablingit

tosupporttheweightoffanandlightxtureunderany

conditions.

LAG

SCREW

LAG SCREW INSTALLATION

LARGE

WASHER

CANOPY hARDWARE

CANOPY LOCK WASHER

(4)

CANOPY SCREW (4)

CANOPY

HATCH

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Casablanca Panama Halo Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Household fans Casablanca Panama Halo