Casablanca Tribeca Installation Manual download pdf (Page 6)

M6001-01 • 09/04/14 • Casablanca Fan Company

Installing Multiple Fans?

If you are installing more than

one fan, keep the fan blades and

blade irons (if applicable) in sets,

as they were shipped.

To install a ceiling fan, be sure you can do the following:

• Locate the ceiling joist or other suitable support in ceiling.

• Drill holes for and install wood screws.

• Identify and connect electrical wires.

• Lift 40 pounds.

If you need help installing the fan, your Casablanca fan dealer can

direct you to a licensed installer or electrician.

Gathering the Tools

You will need the following tools for installing the fan:

• Electric drill with 9/64” bit

• Standard screwdriver (magnetic tip recommended)

• Phillips-head screwdriver (magnetic tip recommended)

• Wrench or pliers

• Ladder (height dependent upon installation site)

Checking Your Fan Parts

Carefully unpack your fan to avoid damage to the fan parts. Refer

to the included Parts Guide. Check for any shipping damage to the

motor or fan blades. If any parts are missing or damaged, contact your

Casablanca dealer or call Casablanca Technical Support Department at

888-227-2178.

Preparing the Fan Site

Before you begin installing the fan, follow all the instructions in

“Preparing the Fan Site.” Proper ceiling fan location and attachment

to the building structure are essential for safety, reliable operation,

maximum eﬃciency, and energy savings.

1 • Getting Ready

WARNING! To avoid possible electrical shock, make certain

that electricity is turned off at the circuit breaker or fuse box

before attempting any installation or repair procedure.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

No comments

Casablanca Tribeca Installation Manual Page 6