Casablanca WHITMAN Owner's Manual download pdf (Page 32)

Remote Control Layout

1. POWER.

After the rear panel

MAIN POWER

switch is

turned on, press this button to exit the standby mode.

Pressing

POWER

again will place the Casablanca into

standby mode, thereby turning off the LCD and muting

all outputs.

2. REMOTE.

Activates/deactivates the

REMOTE POWER

jack on the rear panel.

3. MUTE.

Mutes all audio outputs except the

TAPE OUT

jacks. Press again to disable muting.

4. STATUS.

Displays the current status of the

Casablanca on the video monitor if optional video card

is installed and video display is enabled.

5. INPUTS.

Individual buttons which select the desired

input channel. Within a function’s sub menu page(s),

these buttons select sub functions to edit. When

pressed, they activate a corresponding LED on the

front panel and an arrow on the video monitor.

6. A-D.

Routes either the digital, analog or RF input jack

to the currently selected input channel.

7. SELECT +

and

Incrementally changes the

INPUT

channel, thereby taking the place of buttons

8. LEVELS UP

and

DOWN.

Adjusts master volume for

all speaker outputs. Also increments/decrements

parameter values in most edit modes and shifts

FRONT

REAR

audio balance and

CENTER

speaker

level in the

BALANCE

menus.

9. LEVELS LEFT

and

RIGHT.

Shifts the audio balance

to the left or right and adjusts the

SUB

woofer level

when the

BALANCE

function is selected. Also used to

increment/decrement some parameter values in the

SET-UP

menus. Adjusts

value in the

INPUT

SELECT

menu and adjust the

MASTER

VOLUME

level when in most sub menus.

10. DISPLAY.

Changes the front panel LCD brightness

between off, low, medium and high.

11. PHASE.

Inverts the phase (180

) of all speaker

outputs.

Figure 21 - Remote Control Layout

12. MODE.

Activates/deactivates the

MODE

select pages for currently selected input.

13. TAPE OUT.

Routes an audio or video input (source) to the

TAPE OUT

jacks.

14. BALANCE.

Activates the

BALANCE

menus in order to set a temporary balance configuration to adjust for different

program characteristics.

15. SET-UP.

Displays 2 pages of sub menus which provides access for setting speaker configurations/levels/delays,

analog input levels, naming inputs, setting the display & remote power jack time-out delays, selecting the video type

and setting options for incoming Dolby Digital signals.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 54 55

Comments to this Manuals

No comments

Casablanca WHITMAN Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Receiver Casablanca WHITMAN