Casablanca WHITMAN Owner's Manual Page 54

  • Download
  • Add to my manuals
  • Print
  • Page
    / 55
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 53
48
Appendix E Specifications
Inputs:
Analog audio:
6 stereo pairs (RCA)
Minimum Input Level: 50 mVrms Input Impedance: 10 K
Digital Audio:
Main Digital In Card:
10: 6 coaxial (RCA), 4 optical (2 TosLink, 2 open for optional AT&T or Theta
Digital proprietary Single Mode)
AUX Digital In Card:
6: 2 AC-3 RF (RCA), 1 AES/EBU (Balanced XLR), 1 BNC, 2 optical (1
TosLink, 1 open for optional AT&T or Theta Digital proprietary Single Mode).
Video: 10: 6 composite (RCA), 4 S-Video, NTSC and PAL compatible, Input level & impedance: 1Vpp, 75
IR Receiver: 3.5mm stereo phone jack (rear panel).
Outputs:
Analog audio:
Speaker outputs: 9 channels max.: Left, Right, Center, Left Surround, Right Surround, Left Front Sub, Right
Front Sub, Left Surround Sub, Right surround Sub (All balanced XLR along with separate + and -
single ended [RCA] outputs for each. The Single-ended outputs on the Superior card consist of a +
[RCA] output for each channel).
Speaker outputs: 6 min on Standard quality single ended card: Left, Right, Center, Sub, Left Surround, Right
Surround.
Speaker outputs: 2 min on preamp version (Balanced XLR available in Superior Quality only).
Output Impedance: Superior Card: 10 Ohms on SE output, 20 Ohms on balanced output.
Standard Cards: 36.5 ohms on SE output, 70 Ohms on balanced output.
Maximum Output Level: Balanced: 20 Vrms, Single Ended: 10 Vrms
2 stereo (RCA) pair (Tape Out) on Analog In card.
Digital audio:
Digital Out Card
(optional): 8: 1 AES/EBU (Balanced XLR), 1 Single-Ended (RCA), 1 Optional AT&T
or Theta Proprietary Single-Mode for Front Left/Right, and Single ended
for all other channel pairs (Center/LFfsub, L/R Surround, RFsub/LSsub,
RSsub/non-active Center sub, non-active Lsde/Rsde)
Main Digital In card
: 2 coaxial (RCA) Tape Out’s.
Video: 4: 1 Main, 1 Tape out (both composite [RCA]), 1 Main, 1 Tape out (both S-Video), all on Video In
card, NTSC and PAL compatible
Remote Power: 3 rear panel 3.5mm mono phone jacks: +12VDC (continuous) triggered.
Digital Data: 2 Volume Control Data on Digital Out card
Modes/Processes:
Matrix, Special Matrix, Dolby Pro Logic, Dolby Digital (optional), DTS (optional), Stereo, Mono, Analog
Direct, Analog Matrix, Circle Surround (optional), Spatializer (optional).
Conversion:
A/D Conversion: 20-bit Delta-Sigma, D/A Conversion: 20-bit Ladder (8X over sampling) with superior
quality card, 18 bit Delta-Sigma with standard quality card.
Frequency
Response:
20 Hz-20 kHz,
±
0.2dB, Ref. 1KHz
THD+Noise:
Less than 0.002% @ 1KHz, maximum output level
Dynamic Range:
120dB minimum, 20KHz bandwidth, Ref. 1KHZ
Signal to Noise Ratio:
120dB minimum, 20KHz bandwidth, Ref. 1KHz at maximum output level
Power Requirements:
117 VAC, 50-60 Hz, 120 watts with all options installed.
Dimensions:
19”W x 16”D x 7.5”H (483 x 406 x 191 mm)
Weight:
43 Lbs (19.5 Kg) Stand alone, 50 Lbs (22.7 Kg) Boxed with accessories
Environment:
Operating Temperature: 32 to 95 F (0 to 35 C)
Storage Temperature: -22 to 167 F (-30 to 75 C)
Relative Humidity: 95% maximum without condensation
Remote
Control:
1 hand-held, battery powered control unit uses 2 AAA batteries
Specifications subject to change without notice.
.
Page view 53
1 2 ... 49 50 51 52 53 54 55

Comments to this Manuals

No comments