Casablanca Reverie Owner's Manual download pdf (Page 10)

BLADE INSTALLATION

Blade Irons (5)Blades (5)

Screw Pack C:

Blade Screws(21)

Screw Pack D:

Blade Iron Screws (11)

BLADE HARDWARE (not to scale)

Attach Blade Irons

Step 6. Attach the blade to the bladeholder by first

pressing the blade badge into the blade, then installing the

bladeholder using four screws provided in Pack C. Using

the screwdriver provided, tighten securely by hand only.

Repeat for each blade assembly.

Blade Installation:

Step 7a. Remove the blade access plate as shown. Do not

discard the two screws.  ey will be used to reinstall the

plate later.

Step 7b. Attach the blade/ bladeholder assembly to the

motor by using two screws from Screwpack “D” for each

blade. Use the opening created by removing the blade

access plate to align the holes in the bladeholder with the

holes in the motor. Install the screws one by one using the

screwdriver provided. Tighten securely by hand only.

Step 7c. Re-install the access plate

TIP: For balancing purposes, loosely install all four blades

to the motor before tightening the blade screws securely.

CAUTION:

Blade screws must be tightened securely before

operating the fan.

Blade Badge (5)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

No comments

Casablanca Reverie Owner's Manual Page 10