Casablanca Reverie Owner's Manual download pdf (Page 8)

Step 6a. Route the wires through the 3" Perma•Lock

™

downrod and ball assembly. Insert the downrod into the

motor coupling and turn it clockwise until it stops turning,

ensuring that the pole has bottomed out.

TIP:  e downrod has a tapered thread that is designed

to lock completely when installed correctly.

Step 6d. Tighten the set screw with the Allen wrench to

ensure safe operation of your fan. If it is tight enough, you

should not be able to turn the downrod counterclockwise

with your hands. If in doubt, tighten the set screw with the

Allen wrench until you cannot turn it any further.

Motor Wires

(leave at least 6" long)

Ground Wire

(green)

Perma•Lock™ Downrod

and Ball Assembly

Tapered thread

Allen Wrench

Allen

Set Screw

Motor Housing

Assembly

Motor

Coupling

CAUTION: Failure to fully lock in the downrod

before securely tightening the Allen set screw may

cause the fan to separate from the downrod and fall

during normal operation.

Install Incandescent Lightbulbs

Step 7. Screw in four 25-watt incandescent lightbulbs as

shown.

NOTE: When replacing lightbulbs, be sure to use only

25-watt maximum.

NON-LEAF ASSEMBLY

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

No comments

Casablanca Reverie Owner's Manual Page 8