Casablanca WHITMAN Owner's Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 55
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
37
Set-Up - Miscellaneous
This function allows the user to: 1) Set the amount of time (delay) that the video monitor displays an
applicable current menu before clearing X seconds after the last button is pressed. The delay applies to all
menus except
SET-UP
,
MODE
,
BALANCE
and
TAPE OUT
. These four functions require specific button
actions, described in their respective sections of this manual, to clear the display. 2) Set a delayed activation
time for the
REMOTE
POWER
2
and
3
jacks on the rear panel (for details please reference items 5 and 6 on
page 7); and 3) Set the video monitor display to
NTSC
or
PAL
.
Figure 34 - Video Monitor Display of the SET-UP: Miscellaneous Sub Menu
Press
SET-UP
once, then press the
MISCELLANEOUS
button (
6
) once. The display will shift to the sub
menu shown in figure 34. The current values are displayed in the right hand column of the display.
Additionally, the sub menu title “
MISCELLANEOUS”
will be displayed in the upper left corner. Press
button(s)
1
-
3
to select an option. An arrow will point to the selection just made. Press the
LEVEL
UP
/
DOWN
button(s) to edit the value. The range for the
DISPLAY
and
REM PWR
TIME
s is
0
to
99
seconds
where
0
is off for the on screen display and instant power (no delay) for the rear panel remote power jacks.
Press the
SET-UP
button once to return to the
SET-UP
menu. Press
SET-UP
once more to clear the display
and store any changes. The
MASTER VOLUME
can be controlled using the
LEVEL
LEFT
/
RIGHT,
for level
down/up respectively, in this sub menu.
The display will not time out [automatically clear in X seconds].
MISCELLANEOUS
1 D I SP LAY TI ME: 12 SEC
2 REM PWR TIME: 8 SEC
3 VIDEO CONFIG: NTSC
PRESS 1- 3 TO SELECT ITEM
PRESS UP/DN TO ADJUST
PRESS SET-UP TO EXIT
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 54 55

Comments to this Manuals

No comments